#Throttling mixmax how to#
#Throttling mixmax install#
#Throttling mixmax full#

UgCS will detect the axis and assign it to the payload action. Press the joystick hat in the direction desired for payload control.

Select the connected controller by pressing drop down window at the bottom left corner of the pop up window, then select 'Add axis' Note: scrolling the list will result in many other different possible actions. Select the payload action responsible for the camera or any other equipment on the drone. Two unassigned axes, the joystick has on the top hat, can be used for payload control. Axis is active by default if no button is specified.Ĭalibrating these parameters creates the drone control profile.

#Throttling mixmax full#

Now by pressing the selected button, the drone will move at full throttle instantaneously.Īctivation button is basically the button to activate the axis. It's also possible to add action buttons to reach the minimum and maximum throttle with just one click.Ĭlick the little plus icon under the min or max signĪnd click the desired button on the joystick, then click apply. Invert checkbox allows you to invert the control Pushing the joystick halfway will not affect the drone. Only last half of the axis is going to be used. If it’s set to zero – the axis is used to control the vehicle all the way and set to zero point five, for instance. Example: Nonlinear is set to 0.5, joystick is at full forward position, displaying input parameter -1, resulting an output throttle of 1 (Which is full throttle)ĭeadzone ignores part of axis control.Example: Nonlinear is set to 0.5, joystick is halfway pushed forward, displaying input parameter -0.50, resulting an output throttle of 0.25.If set to zero point five for instance, the cubic parabola has changed, so the drone will accelerate much slower at the beginning and the more force being applied to the controller, the faster it will fly. In other words – More force applied to the controller – the faster the drone flies. If it’s set to zero, the throttling will be linear. Nonlinear option allows changing throttle sensitivity. Note: Negative and positive parameters represent backward and forward thrust correspondingly. It will give only about 30 percent of the throttle. If these parameters are sent to minus three and three for instance.

More the number – the less output you’ll receive.įor instance: With Min and max parameter set to minus one and one correspondingly, the drone will fly at full throttle. Min, zero and max parameters represent the throttle output. Output represent how this force will affect the throttle Input represent how much force you apply to the joystick. The two main parameters are Input and output. Two remaining axes can be assigned to different actions.Įxample of pitch parameter control settings: UgCS has assigned four axes out of six this particular controller has – pitch, roll, elevation and yaw. Select what the controller is mainly going to control - vehicle or payload. Uncheck the keyboard box for ease of navigation. UgCS should detect controller automatically.Ĭlick the keyboard icon – the Input mapping to adjust the controller settings

#Throttling mixmax install#

If the controller is connected for the first time, wait for the system to detect it or install the drivers manually. Pick the one of your choice and connect it to the laptop.

#Throttling mixmax how to#

Main Page UgCS How to Setting up profile for vehicle control